You’ve decided to add the charm and elegance of the old world to your home-you’ve loaded wrought iron into the design. Whether you’re forging iron outside or inside,it looks old-fashioned, solid, gorgeous. On the other hand, you know that the elements and unkempt fingers of your home can exercise that wrought iron.
So you need some way to protect your new decorative elements and make them look as impressive as the day you bought them. Below, you’ll find four tips that will help you maintain the status of wrought iron after decades.
Of course, if you don’t want to maintain yourself, you can always hire an expert to do it for you.
Step 1. Daily Cleaning Iron Through the other steps in the list, you don’t have to do it every day. However, dust gathers in your home every day, you should use microfiber cloth to wipe off the surface of dust to keep the home and air clean.
This kind of daily life is especially important if you exercise iron, because if the iron filings remain on the metal for too long, the structure of the iron will absorb dust. Do not overlook this part of your routine maintenance.
Dust removal of wrought iron, so that debris will not accumulate and become a metal semi permanent characteristics.
Step2. Use warm water and mild detergent to remove family waste Maybe you have wrought iron in your kitchen, dining area, bathroom or bedroom. In any of these areas, you may accidentally get food, toothpaste or other contaminants on your metal decorations. Again, the longer the fragment is there, the more you have to work hard.
In addition, some things, such as toothpaste, may be eaten through a metal primer and lead to corrosion. When you, your spouse, your child, or your pet produces contaminants on metal, remove it on the same day, and then use a mild detergent. Don’t use irritating chemicals like the one you use to scrub your bathtub. Use a strong mixture of mild water and mild detergent solutions.
Add only one or two drops of soap in a small vial. Also, when you scrub, use a gentle repetition instead of strength and wear to clear the debris.
Soft cloth and repetitive motions protect paint, primer and metal itself from erosion and corrosion.
3. Scrub, document, Prime, and draw your wrought iron era You may need to modify wrought iron occasionally.
When you do this, make sure you take the following steps:
Use a wire brush to loosen all the cutting paint on the iron surface.
Wipe the files or scrape the rough paint or metal patches until they become smooth.
Use approved acids, such as phosphoric acid, to remove any chemical debris from the surface where the paint is to be removed.
Prepare wrought iron with a metal primer.
Paint your iron and move it from the top of the item to the bottom. If you don’t know what kind of acid, primer or paint to use, consult your local home decoration store specialist.
This professional can point out the best brands and products for you.
4. Remove when rust occurs-don’t ignore it Removing rust also requires a step-by-step process.
Start with the following tips:
Scrub the rust with a wire brush and remove any flakes.
Dip the fine wire wool into the kerosene and wipe off the rest of the rust.
Use liquid wax to cover previously rusty areas. If your iron decorations are rusty, you may need to replace the whole piece. Or, in some cases, you can use navy jelly to completely dissolve the rust.
Still, you may spoil the structure of the piece. With the tips above, you can keep your wrought iron home function or decorate the original for the next decades. If you have any specific questions about wrought iron, please contact the seller or professional of your home improvement shop.
More information or have some requirement about wrought iron product,please contact with us right now,we are here to waiting for your querying !